Life and influencing factors of
Hydraulic Oil Filter Element.
hydraulic oil filter has been widely used in various industries and is one of the key components of hydraulic equipment.
In the process of using the
filter element, many factors determine the life of the filter element, which should be replaced at the appropriate time to prevent the failure of the filter function.
1, hydraulic oil factors
After determining the target cleanliness level of the hydraulic oil system, it is very important to always ensure that the hydraulic system works under the target cleanliness level.
Working under the basic cleanliness required by the hydraulic system can avoid the wear of the moving components caused by pollution and extend the life of the system.
If the cleanliness level is too high, the filtration accuracy of the selected filter element will be made, and the number of replacement of the filter element will increase (equivalent to the reduction of the life of the filter element), resulting in an increase in the use cost; The cleanliness level is too low, the filter element with low filtration accuracy is selected, the number of replacement of the filter element is reduced, but the safety risks of the hydraulic system are increased, and the filtration function is failed. Therefore, the target cleanliness level of the hydraulic system is one of the factors that determines the service life of the filter element.
2. Pollution factor of hydraulic oil
In actual production, the main factor of failure of filter element in hydraulic system is high pollution intrusion rate.
The high pollution intrusion rate increases the filtration burden of the filter element and thus shortens the service life of the filter element. The greater the degree of pollution of hydraulic oil, the smaller the life of the filter element. To avoid reducing the life of the filter element due to hydraulic oil pollution, the key is to strictly limit the path of environmental pollution that will enter the hydraulic system.
Therefore, the sealing of the oil should be carefully ensured as far as possible, and the decomposition and reinstallation of the components should be carried out under certain protection to protect and prevent excessive air dust and pollution from entering the oil circuit.
3, the importance of high-quality
oil filter element The high-quality filter element of Risvig has strong contaminant capacity, low resistance, large flow rate and stable performance, which can ensure satisfactory filtration effect and service life of oil under specific target cleanliness. Strict quality control and advanced production process ensure that each
Hydraulic Filter element maintains the same performance and has high reliability characteristics.
4, the quality of
hydraulic filter element
Hydraulic system conditions determine the filter element to withstand fluctuating pressure, impact and erosion, filter material selection, fluid matching, structural strength and other characteristics are also one of the important factors affecting the life of the filter element.
High-quality filter element has great reliability advantages in material selection, manufacturing technology, process and other aspects, which can effectively avoid cracking, damage and other quality failure factors in the process of fluctuation impact, greatly reduce the potential failure risk, and reduce the production cost of unexpected maintenance.
