1. Replacement steps:
Turn off the power to the
activated carbon filter and wait for the
Activated Carbon Filter to stop running.
Locate the fixing screw on the activated carbon
Filter Housing and open the housing.
Remove the old, activated
carbon filter cartridge and install the new activated carbon
filter cartridge into the filter cartridge tank.
Reinstall the housing of the activated carbon filter and secure the screws.
Turn on the power of the activated carbon filter and wait for the device to run normally.
Ii. Precautions:
When replacing the activated carbon filter element, it is necessary to pay attention to safety and avoid injury.
The replacement cycle of the activated carbon filter element is generally determined according to the use and the degree of water pollution. If the water quality is seriously polluted, the replacement cycle needs to be shortened; If the water pollution is light, the replacement cycle can be extended.
When replacing the activated carbon filter element, it is necessary to pay attention to whether the model and specification of the filter element are the same as the original one to avoid affecting the filtration effect.
When installing the activated carbon filter element, it is necessary to ensure the sealing and stability of the filter element to avoid affecting the filtration effect and service life.
When replacing the activated carbon filter element, it is necessary to pay attention to cleaning the filter shell and filter basket and other components to ensure the cleanliness of the equipment.
After replacing the activated carbon filter element, it is necessary to carry out backwashing operation to clean the filter element of the activated carbon filter to ensure the normal operation and service life of the equipment.
In short, the replacement of the activated carbon filter element is an important measure to ensure the normal operation and service life of the equipment, and it is necessary to operate in accordance with the replacement steps and precautions to ensure the normal operation and service life of the equipment.